Here's how to deep clean all the floors in your home without spending a penny
A pleasant and comfortable interior goes hand in hand with meticulous cleaning of all surfaces in the house, especially the floors. These are subjected to harsh tests between comings and goings, bacteria and dirt from the outside. To maintain the cleanliness of your home, we reveal the procedure to follow to naturally clean all types of floors.
Dust, dirt and microbes affect the quality of your floors and even that of the air inside your home. Also, to prevent your tile, marble, terracotta or parquet flooring from being damaged over time, good maintenance is essential. However, it should be noted that each type of floor requires different maintenance. Some products, even natural ones, may not be suitable for the floor of your home. We reveal to you what type of cleaner to use to maintain the coating of your floors.
How to clean all types of floors in your home with natural products?
Before starting the task of cleaning the floor, you must first empty the room and get rid of carpets, chairs or even toys and objects lying around. Sweep or vacuum the floor to remove dust. Also consider vacuuming under furniture such as tables and sofas. Then dust the furniture with a slightly dampened microfiber cloth to trap the particles. Once this dusting step is done, you can move on to cleaning the floor. Clean the marble floor
If you have a granite, marble or stone floor and want to use ecological and economical products, you can prepare a cleaner with these natural ingredients. You will need:
2 tablespoons baking soda
1 tablespoon liquid Marseille soap
2 liters of water
Pour the water into a bucket, then add the baking soda and Marseille soap. Mix everything and soak your mop with this preparation then pass it over the entire surface to be cleaned to remove dirt and bad odors.
You should also know that it is not recommended to use acidic products such as vinegar, lemon or citric acid on natural stone, granite or marble surfaces, at the risk of damaging them over time.
– Clean the tiled floor
The floor tiles can quickly get dirty and joints that darken over time look unattractive. To get rid of dirty tiles, use dishwashing liquid diluted in water and mop the entire surface.
To clean the seals, use baking soda which, incidentally, is a powerful whitening product. To take advantage of its stripping powers, mix three parts baking soda and one part water to obtain a consistent paste. Spread it on the joints using a brush and rub. Leave on for a few minutes before rinsing and wiping with a dry cloth. - Clean the terracotta floor
Terracotta floors are very typical and give a warm and welcoming side to a house. To properly maintain them, it is a question of finding the cleaners that are suitable for this material. And for good reason, this type of floor tends to absorb dirt and stains. To clean it, you will need the following ingredients:
½ cup white vinegar
2 tablespoons of dish soap
A few drops of lemon essential oil
2 liters of water
Mix all the ingredients in a bucket then dip a microfiber cloth in the solution and run it over the floor to clean and shine it. Dry the floor with another dry cloth. Clean the parquet
This wooden surface is very delicate and requires a lot of care and maintenance. To clean it, you need the following ingredients:
2 tablespoons baking soda
1 tablespoon castile soap
2 liters of water
Mix the ingredients in a bucket and use the preparation to clean your floor with a mop. Then dry the wooden surface with a dry cloth so as not to leave traces of humidity on the parquet.
You now know that for each type of floor there is a special cleaner, in order to maintain and take care of your surfaces for as long as possible.
0 Comments:
Post a Comment